← back to the showcase

Four measured simulation-engine families: 2.23–3.79× on the stated workloads

This report compares fixed ten-scenario studies on four engines, including three separate NoiseModelling families. The measured outputs matched each study's declared contract: full-file byte equality for NoiseModelling and GRASS, scientific statepoint equality for OpenMC, and complete predeclared canonical JSON equality for IfcClash.

The factor is complete elapsed wall time of the original path divided by complete elapsed wall time of the TAKT path for the same declared family. Runtime setup and output delivery within that boundary are included; preparation of the frozen test fixtures and independent output comparisons are outside the timing window. No cost is amortised over unexecuted requests.

Engine and study Family measured Factor What matched
OpenMC 0.15.3, fixed-source transport ten density scenarios; each scenario has 10 batches of 1,000 histories; fixed-source continuous-energy FENDL 3.2 3.55× vs a resident native SDK session; 3.79× vs ten command-line runs 60 final statepoint outputs per campaign, equal under the declared scientific contract (55 dataset/attribute keys plus all tallies; nine volatile fields excluded)
NoiseModelling 5.0.1, CNOSSOS-EU noise map three separately measured barrier families on the same road/building/receiver fixture, with the base stated for each study: ten heights of one barrier added to a barrier-free base; ten positions and the ten specified lengths of an existing 200 m, 4 m-high barrier in a screened base; 4,096 receivers, four PERIOD records per receiver 2.54× (heights), 2.37× (positions), 2.39× (lengths), each vs a resident JVM computing ten full maps 60, 110 and 110 complete CSV outputs (16,384 data rows × 13 columns each), matching fresh-CLI references byte for byte
IfcClash 0.8.4 (IfcOpenShell), BIM clash detection ten constructed placement scenarios of the same 132 elements in a 6,587-element model (about 53 MiB) 2.23× for the complete ten-scenario family vs stock with native HDF geometry cache 30 paired scenario comparisons / 60 complete canonical outputs, equal under the predeclared C-v1 contract (see below)
GRASS GIS 8.4.2 r.horizon + r.sun, terrain solar irradiance ten distinct DEM scenarios of a 1,350 × 1,500-cell, 10 m DEM, repeated in three pairs 2.38× (median of three paired family ratios) vs ten full stock pipelines in one GRASS session 510 paired full-file comparisons over the 17-file contract, byte for byte

Project names identify the measured software; no endorsement is claimed.

How a family is measured

Each comparison uses the baseline and fixed inputs stated below, including the documented resident or stock-cache setup. Complete family runtimes were measured in three interleaved pairs on the same pinned core, with one native worker; output comparison was outside the timed window. These are finite noisy-stand measurements, not confidence bounds.

Separate one-edit comparisons were slower: 0.66× for OpenMC and 0.80× for NoiseModelling, against their documented CLI baselines with full per-request setup. The ten-scenario studies below have different boundaries. A crossover at the second scenario has not been measured.

OpenMC: fixed-source scenario families

Fixture: a layered shield with a 1%-volume insert, free-gas water and H1/O16 continuous-energy data (FENDL 3.2), 293.6 K, fixed source, 10 batches × 1,000 histories per scenario, one thread, seed 20261028. The ten declared insert densities are 0.84, 0.88, 0.92, 0.96, 1.04, 1.08, 1.12, 1.16, 1.20 and 1.24 g/cm³; the base density is 1.00 g/cm³.

Results: W/U = 3.55× (pairs 3.36, 3.56, 3.76) against a resident native C++ SDK session with one initialisation and ten full runs; 3.79× (pairs 3.45, 4.00, 3.97) against ten full openmc command-line runs. Each factor is the ratio of summed complete family wall times. In each campaign all 60 final statepoint outputs matched the declared scientific contract: 55 scientific/stable dataset and attribute keys and all tallies. The exact list excludes the file date and eight runtime timers; unknown keys remain compared. Entire HDF container bytes are not claimed identical.

Measured scope: the stated ten fixed-source density scenarios on one thread, with all other inputs fixed. Eigenvalue, geometry and other edits are outside this measured claim. OpenMC's upstream MIT licence is retained; this page includes reports and readings only.

NoiseModelling: barrier scenario families

Fixture: an original synthetic grid in SRID 2154 with 4,096 receivers, 4,096 road segments and 1,024 buildings, 8–20 m high, computed with the stock Noise_level_from_traffic and Export_Table Groovy scripts on H2GIS. For the height family, each of the ten inputs independently adds one barrier to the same barrier-free base, at the same XY and length, with height 1…10 m.

Results, heights: W/U = 2.54× (pairs 2.52, 2.53, 2.56) against a resident JVM computing ten full maps; the ratio of summed complete family wall times. All 60 complete CSV outputs (16,384 data rows × 13 columns, including header, order and formatting) match the ten fresh-CLI references byte for byte.

Two further families were measured on the same fixture, each as a complete ten-scenario family against the same resident-JVM baseline, with a fresh base calculation paid inside every TAKT family. The position and length studies start from a screened base containing one 200 m barrier at height 4 m. Every variant is prepared independently from that screened base.

Measured scope: independent height, position and length scenarios of one barrier on this fixture, one axis varied per family. Combined edits, several barriers, other fixtures and other layouts are outside these measured results. NoiseModelling's upstream licence (GPLv3) is retained. This page distributes the measurement report and readings only; deployment and any redistribution obligations must be specified separately.

IfcClash: clash detection across placement scenarios

Fixture: the buildingSMART Medical-Dental Clinic plumbing model (IFC 2x3, about 53 MiB, 6,587 geometric elements in the checked set), intersection check with a 2 mm tolerance over all element pairs. The ten inputs are constructed independent translations of the same 132 selected elements by +0.01…+0.10 m from the same base.

Results: the complete ten-scenario family measured 2.23× (pair ratios 2.20, 2.23, 2.26) against stock IfcClash with native HDF geometry caching, including the first result in both paths; the ratio of summed complete family wall times.

Output contract: the comparison uses the complete stock JSON report after the predeclared B3-2-C-v1 formatter. It stably orders object members and oriented clash identifier pairs, while preserving A/B roles, every array's order and multiplicity, all known and unknown fields, JSON types and exact numeric token spelling, including signed zero. No rounding, deduplication, field removal or unordered-pair normalisation is allowed. The complete canonical bytes are compared; raw stock JSON byte identity is not claimed.

Measured scope is only these ten frozen placement inputs and the fixed configuration. Generic IFC revisions and general recovery behaviour are outside this measured claim. IfcOpenShell's upstream LGPL licence is retained. The page does not include the engine or a TAKT binary; delivery and licence obligations are specified separately.

GRASS GIS r.sun: terrain irradiance after DEM edits

Fixture: the official North Carolina sample DEM at 10 m (1,350 × 1,500 cells), twelve horizon rasters and the full r.sun pass with fixed day and atmosphere parameters, 17 declared output files per run (five rasters with their header and world files, grid and CRS). The ten inputs independently raise the same 100 × 100 m patch of the original DEM by 1…10 m.

Results: the median paired family ratio was 2.38× (2.37, 2.39, 2.38). The baseline ran ten complete stock horizon/slope/SUN/export pipelines in one GRASS session; each current DEM received its own twelve newly computed horizon rasters. Ten distinct scenarios were repeated across three pairs, yielding 510 full-file byte comparisons under the 17-file contract. A separate earlier horizon-only configuration measured 1.82× in one complete pair; it is not a three-pair ablation of the present result.

Measured scope: the stated local DEM edits, fixed day and atmosphere, GRASS 8.4.2 and the declared outputs. GRASS is GPL-2.0-or-later; this page includes reports and readings only. Deployment and redistribution terms are specified separately.

What this is and is not

Put the calculation on your family

Send one real family: the engine and version, one base model, the variants you already compute, and how long one run takes. We return the same outputs under the agreed observer and the measured time of both paths. Pilot acceptance is assessed on the agreed full representative workload and declared output contract, under the Terms and the accepted order or passport; the default measured wall-time factor for payment is B/C ≥ 1.10.

Contact: [email protected] · Start with a free assessment

Experiment fingerprints

Study SHA-256 of the internal report
OpenMC, resident-SDK baseline d0881264b7340d1c734edafb132e30783ada3c0817508aee4b0e7f73566ad372
OpenMC, command-line baseline b60e2071dd092c6dc9ab3e8e9bb946c93f1324f7c2f3e24c04e4b0b0971b6b3c
NoiseModelling family 7ae9d2fb400861f413abd1731f40ebf00c6cfd2a9dda2c44c3f3bc1175359da0
NoiseModelling positions family 82a8042a943471044b0fe5dda1ab3558b70800824808f3564f9bf016617c693c
NoiseModelling lengths family d50a815940bc18035d619ff01e026a94959b0cf41985a0680aac0e7886c1aba3
IfcClash family ab23f6604ccaf237d68541382319680e449f81b17e7f8f3772434448bd9b1b3d
GRASS r.sun family e8b3ea67b86ae110c950aea05a33c80032e3a85688a11611f58cc82e6886d3c2

Source records and their fingerprints are retained for private review. The reports themselves are not included on this page. Independent source reviews cover only the stated fixed measured families and observers. They do not certify a general engine optimisation product or every fallback path.

Source text: README.md

Telegram